Came Krono-S5D Kit User Manual download pdf (Page 15)

2.5 - Wiring the Motors

Wire the gear motor by following the wiring diagram on the label which is fastened to the gear motor

(fig 13).

For the cable connection, use the appropriate cable clamp (part A) supplied, fixing it to the capacitor

support (part B).

2.6 - Wiring in the Safety Photocells

Safety beams should be fitted approximately 15 inches fom ground level.

If fitting a second arc line of safety beams then C & NC must be wired in ‘series’.

Fig

Ground

Terminal block

U/XV/YW

Part. A

Part. B

Fig 13

10 2 TX C NC

Fig 14

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

Came Krono-S5D Kit User Manual Page 15