17
ENGLISH
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
Adjusting the closing run-limiter (with slowing-down during closing)
1) Position dip-switch n°10 to OFF
2) Briefl y press the AP/CH button. When the door is about 20cm from fully closing shut…
4) Turn the red cam counter-clockwise until the closing run-limiter micro switch is activated. Block the cam with the screw in
that position.
4#!
3%.3
-/4/2%!
#(
!02%
!0#(
4#!
3%.3
#(
!02%
!0#(
4#!
3%.3
&53-/4/2%!
&53#%.42M!
#(
!02%
!0#(
CM
3) … briefl y press the same button again.
TEST
Use the AP/CH button to command both a closing and an opening run to make sure that the adjustment was performed properly.
Comments to this Manuals