10
The data and information provided in this manual are to be considered susceptible to change at any time without warning, by CAME cancelli automatici S.p.A.
ENGLISH
- Release the gearmotor and position the bar vertically, and then refasten
the gearmotor.
- Hook the tie rod to the anchoring racket.
Perform the same procedure if there is a second screw.
- Insert the UNI5739
M12X70 screw into
the spring securing
bracket and tighten the
UNI5588 M12 nut to
the screw (1-2).
Tighten the screw to
spring (2) and the
tie rod to the part
underneath (3-4).
Comments to this Manuals